ROHDE & SCHWARZ

FSV30

NRP-Z11 

FSU3

FSEB30

FSP7

Spectrum Analyzer

spectrum analyzer with 5 kHz to 1/2/3 GHz bandwidth (upgradable by software option), 1 Hz to 3 MHz RBW and a 25.6 cm (10.1") color display (1366x768 pixels). The integrated tracking generator can also be used as a standalone signal generator. Upgradable to a one-port vector network analyzer, providing a unique 3-in-1 solution with spectrum analyzer, signal generator, and a vector network analyzer in one. 

FPC1500

HMP4040

Spectrum Analysis

Vector network analyzer (5 kHz to 3 GHz)
3 in 1 testing device with optional spectrum analyzer and power meter

ZNL3

FSW43

RTM3004

FSWP26

CMT54

ZVR-B19

Test set: Bidirectional
Receiver channels: 4
Wide frequency range: 10 Hz1) to 4 GHz
Wide dynamic range1): >130 dB
High sensitivity1): <–130 dBm
High measurement speed: <125 µs/point
Fast IEC/IEEE bus2): <15 ms
High frequency resolution:  10 µHz
Short calibration times3): <20 s
Large display: active 26 cm colour LCD

HMC8043

FSH4.24

UPP800

ZVT8

FSP40

ZVA50

SFL-J

FSH4

ZVK40

-Two-port vector network analyzer
-Frequency range: 100kHz - 3GHz
-Can be used for bidirectional measurements of S-parameters S11, S21, S12 and S22 on passive components
-Can start measuring immediately after you switch on the instrument


ZNLE3

ZVM20

Power Meter 

The R&S NRP2 power meter offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace power meters, e.g. from other manufacturers, with the R&S NRP2 power meter without having to change the remote control code. 

NRP2

SMA100B

ZNA26

NRP-Z81

SMR20

ZNL6

FSWP8

ZNL20

Frequency range 5 kHz to 26.5 GHz
SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz 
DANL with preamplifier: typ. –163 dBm from 10 MHz to 2 GHz
Lightweight with small footprint
40 MHz analysis bandwidth (option)

FPL1007

ZVA8

FPL1003 

Spectrum Analyzer

Frequency range from 9 kHz to 6 GHz
Excellent RF performance ideal for many standard measurement applications
Tracking generator models available
Compact form factor
Low power consumption

FSC6

RTO6

MXO54-2000

FSV7

RTE1034

URV3

-5kHz - 1GHz frequency range
-Frequency upgradeable to 2GHz/3GHz via keycode
-10.1" WXGA (1366 × 768 pixel) display - largest and highest resolution in its class
-Resolution bandwidth settings down to 1 Hz

FPC1000

RTE1054

A Vector Network Analyzer with Frequency 9 kHz to 8.5 GHz, Measurement Speed 4 ms, Dynamic Range typ. 122 dB to 140 dB, Output Power typ. 12 dBm to 15 dBm, Power Sweep Range 98 dB. 

ZNB8

SMBV100A

- Multi-RAT signaling: LTE, WCDMA, GSM, WLAN, Bluetooth
- LTE-Advanced: 8DL CC up to 4x4/8x2 MIMO fading, 2 UL CA
- WLAN 11 a / b / g / n / ac / ax SISO and MIMO signaling test
- Internal server for application testing

Wideband radio communication tester is the universal test platform for RF integration and protocol development.



CMW500

Signal Analyzer

Signal analysis and high-end spectrum analysis in one instrument.

FSQ8

TSMA

The R&S® SMW200A is the vector signal generator for the most demanding applications. As a result of its flexibility, performance and intuitive operation, it is a perfect tool for generating complex, digitally modulated signals of high quality.

SMW200A

ZVA24

FSP30

SMB100A

A handy analyzer for installation and maintenance in the field; easy operation and simple documentation
The R&S®ZVH is a rugged, handy cable and antenna analyzer, designed for use in the field. The low weight and simple operation make it indispensable for anyone who needs to make efficient measurements outdoors when installing and maintaining antenna systems.

ZVH4

ZVB20

FSH3

SMF100A

ZVB4

SME03

RT-ZHD60

The R&S®FSL is an lightweight and compact spectrum analyzer that is ideal for a large number of applications in development, service and production. Despite its compact size, it offers a wealth of functions more typical of the high-end range, thus ensuring an excellent price/performance ratio. The R&S®FSL is the only instrument in its class that features a tracking generator up to 18 GHz and
can analyze signals with a bandwidth of 28 MHz. In addition, the R&S®FSL18, which operates at frequencies up to 18 GHz, supports applications in the microwave range.

General purpose spectrum analyzer - the standard in the medium class

FSV3-K72

ZNB20

FSWP50

The high versatility of the R&S®CBT results from the use of a parametric measurement concept, which allows all Bluetooth® signal parameters to be set in virtually any desired combination. The effect of different parameter combinations on results can be seen immediately. For example, most measurements can be performed on single frequencies or in hopping mode using any desired bit patterns and packet types.

RTE1104

RTB2004

-Realtime demodulation
-Advanced frontend and FPGA-based demodulation
-Preselection with additional 75 Ω RF input
-Integrated spectrum analyzer
-Video decoder for MPEG-2, H.264 (MPEG-4), HEVC and AVS/AVS+

SML03

ZVL6

FSEA30

SFL-T 

FSB-RF 848.0550.52

UPP200

ZV-Z224

AFQ100A

AFQ100B I/Q Modulation Generator. High performance baseband signals

AFQ100B

Compact, lightweight and extremely fast
Suitable for service, production and development
Remote control via IEEE488/IEC625 bus + RS-232-C • Automated regression and stress testing of DUT
Automatic go/nogo testing of fixed and portable part

CMD60

SMA100A

The R&S®CBT32 is a cost-effective rack version of the R&S®CBT featuring identical test capabilities and has been optimized for use in production.

CBT32

The Signal Generator R&S SM300 with its adjustable frequency range from 9 kHz to 3 GHz is suitable for all applications for which a high-quality signal is required. The internal LF generator can be used as a modulation source and permits generation of analog modulated signals. External signals applied to the I/Q inputs permit generation of any modulated signals as are required in mobile radio, for example (modulation source, e. g. R&S AMIQ).

SM300

The powerful broadcast signal generator for production test systems

SFE100

Universal Radio Communication Tester

The base station tester combining RF parametric testing and signaling 
- Extremely high-speed testing 
- Highly accurate measurements 
- Modular future-proof design 
- Comprehensive spectrum analyzer and signal generator 

- GSM: AMR testing 
- WCDMA: signaling mode 
- HSDPA: RF parametric testing and signaling mode

CMU 300

vector network analyzer continuous sweep up to 110 GHz 

ZVA67

SMU200A

SMY02

FSEM20

FSP-38

FSAD 804811052

Flexible RF interface permits simultaneous testing of up to eight devices. Remote control and measurement concepts are compatible with the R&S®CMW500. This tester provides a new eco-friendly hardware concept, featuring extremely low energy consumption and a very compact size. 


Continuous frequency range up to 6 GHz and RF bandwidth up to 160 MHz 
Parallel testing on up to eight bidirectional RF ports
Wide range of methods to reduce test time and maximize capacity utilization
High measurement performance – high measurement accuracy

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

ROHDE & SCHWARZ

概要（Overview）

現在の掲載品

全ての製品

サービス

トップ製品

FSV30

NRP-Z11

FSU3

FSEB30

Moovに掲載品して、すぐに申し分ない購入者を見つけましょう。

全ての製品

全ての掲載品を見る