Teradyne Completes Acquisition of Eagle Test Systems, Inc.
Eagle Test Systems, Inc engages in the design, manufacture, marketing, and service of automated test equipment for testing analog.

The ETS-364 is a general-purpose precision analog and mixed-signal test platform designed for high volume production testing of integrated circuits; optimized for high throughput applications with a fully integrated multisite software and hardware architecture.

TERADYNE / EAGLE

ETS-364

The ETS-300™ is a versatile and capable multi-site testing device that provides increased testing capability at competitive prices. It is the “bigger brother” of the ETS-200™, with the ability to provide up to 160 analog pin channels and 32 digital channels. The ETS-300™ is compatible with all test programs and device under test (DUT) hardware developed for the ETS-200™, making it an affordable and scalable choice for addressing increasing production volumes. The ETS-300™ is suitable for a wide range of target markets, including power management devices, battery management devices, display drivers, consumer audio, temperature sensors, fan speed controllers, smoke detectors, disk drive sense amps and servo controllers, automotive devices, BUSS drivers, high precision high speed amplifiers, and precision voltage references. Whether you are looking for scalability or the unique multi-site testing capabilities of Eagle at a reasonable price, the ETS-300™ is an excellent choice.

ETS-300

ETS-500

The ETS-88 is an optimal test platform for testing a wide variety of devices including: simple analog, high precision, high voltage, high current / power, automotive, video, audio, complex mixed-signal, as well as emerging power processes like SiC and GaN. The ETS-88 test system hardware is designed to provide independent floating resources per site to avoid resource sharing across sites while improving site-to-site isolation and measurement accuracy.

ETS-88

SPU-100

The ETS-364B is a variant of the ETS-364, a general-purpose precision analog and mixed-signal test platform designed for high volume production testing of integrated circuits. It is optimized for high throughput applications with a fully integrated multisite software and hardware architecture. The test system offers separate floating resources for each site, improving site isolation and measurement accuracy, and is coupled with digital instrumentation to enable the most efficient, high-volume testing available. The ETS-364B supports up to 240+ analog pin channels and has 64 digital channels (with an option for 128). It is also scalable, with the ability to double its capacity with the ETS-600, providing more than 480 analog pin channels and up to 256 digital I/O pin channels. This makes the ETS-364B a powerful and versatile tool for testing integrated circuits.

ETS-364B

ETS-564

The APU-12 is a 12 channel, four quadrant V/I instrument that is part of the ETS-88 test system. It has six current ranges, ranging from 200 mA to 10 uA at +/-30 V. This instrument is designed to provide high precision and accuracy in testing integrated circuits, as part of the ETS-88 test system’s robust assortment of available instruments. The ETS-88 test system is optimized for high throughput applications and offers both measurement speed and high accuracy, following the Eagle tradition of providing high precision test capabilities. The APU-12 is one of the many instruments available in the ETS-88 test system that helps to ensure trustworthy test results.

APU-12

QTMU BOARD FOR ETS

DPU-16

The ETS-800 Test Platform is designed with a unique Multi-Sector Architecture whereby the system is inherently scalable in terms of site count up to 1024 total sites. The system supports up to four sectors which are typically configured in a symmetrical fashion. Each sector represents a complete mixed-signal multisite test system capable of testing a wide variety of products. Systems are controlled via a single multi-core test computer and may be populated with one, two, or four sectors based on the desired maximum site count.

ETS-800

ETS-600

ETS-800L

APU-10

The Teradyne EAGLE ETS-200 is an automatic test equipment (ATE) system manufactured by Teradyne Inc., a leading supplier of ATE systems for testing electronic components. It is part of the ETS series, which provides cost-effective testing solutions for various electronic products. The ETS-200 offers flexible configuration options, comprehensive test coverage, high throughput, a user-friendly test development environment, and scalability. It is designed to test analog, mixed-signal, and digital components efficiently and accurately.

ETS-200

The ETS-200T discrete test platform is built on proven ETS technology and provides true index-parallel testing specifically for turret and rotary handlers. These test systems maximize throughput with pattern-based test techniques based on Eagle SmartPin™ technology coupled with the use of dynamic Cbits for enhanced user control. The ETS-200T provides a complete test solution from wafer sort to final test for MOSFETs, including integrated control and datalogging for UIL, dVSD, Qg and LCR meter.

ETS-200T

SPU Family (112, 500): a suite of V/I’s capable of addressing a wide range of test requirements ranging from 100V / 2A to 500V / 50mA with fully AWG and digitizing capabilities per channel. SPU-112 is capable of up to 12A pulses when paired with the booster board.

SPU-500

SPU-112

ETS-200T/FT

12 Floating resource slots (six per sector)
One DPU-16 instrument per sector (32 pins total)
Two HPU instruments per sector (400 A total)
AC-2500 card cage
AC instruments
Matrices
Electronic motor DIB actuator

TERADYNE / EAGLE

概要（Overview）

現在の掲載品

全ての製品

サービス

トップ製品

ETS-364

ETS-300

ETS-500

ETS-88

Moovに掲載品して、すぐに申し分ない購入者を見つけましょう。

全ての製品

全ての掲載品を見る