メインコンテンツにスキップ
Moov logo

Moov Icon
TEL / TOKYO ELECTRON LITHIUS Pro V-i
    説明
    Multi-block resist coater/developer
    構成
    Cassette block: (Qty 5) FOUP load ports Carrier RFID capability and pressure sensor on CSB Developer stacks 1, 2 and 4 (per stack): (Qty 2) developer cups sharing a common arm and (Qty 2) NTD cups with individual nozzle arms Temperature-controlled dispense: one MGP nozzle shared by the developer cups and one 2 mm NTD nozzle per NTD cup One ADR nozzle per stack and one N2-purged PDR nozzle per NTD cup One bevel rinse nozzle set per NTD cup and one backside rinse nozzle set per cup Bulk FSI developer supply, external thermal control in STHC and separate solvent-base drain Pre-plumbed for future FIRM field retrofit Coater stack 3 and top coater stack 5: Stack 3: (Qty 10) 1.2 mm resist nozzles, (Qty 10) 3 mL CRD dispense pumps and (Qty 10) single-bottle resist supplies Stack 5: (Qty 6) 1.2 mm resist nozzles, (Qty 6) 3 mL CRD dispense pumps and (Qty 6) single-bottle resist supplies Each stack: (Qty 4) coater cups with backside rinse, one temperature-controlled SRRC nozzle and (Qty 4) COT dispense detection systems Each stack: adjustable EBR angle, bulk FSI solvent dispense and version 2 bevel rinse nozzle Each stack: exhaust pressure control, exhaust duct and drain case cleaning, and external thermal control in STHC Thermal processing: (Qty 9) chilling adhesion stations (CADH) with plate-temperature-based wafer wedging detection Bubbler-type HMDS tank in the main process block Slim chill plate stations (SCPL) with vacuum-based wafer wedging detection Chill plate stations (CPL) with optical wafer wedging detection Chilling high-precision hot plate stations (CPRP) with plate-temperature-based wafer wedging detection and 0.1 mm ceramic proximity gap pins on the chilling arm Immersion and interface blocks: IPRB with IPRA wafer transfer arm (Qty 5) pre-immersion spin rinse stations (SRS), each with an IDR nozzle, N2 capability and an immersion edge nozzle (Qty 4) post-immersion rinse stations (PIR) with IDR nozzles and N2 IFBS with IRAI wafer transfer arm and pickup from both sides Environmental control: TEL system temperature and humidity controller (STHC) Shinwa unit controls system environment, chemical temperature and CPL temperature (Qty 2) return-air plenums Chemical supply and power: (Qty 2) chemical cabinets with HMDS canister, sub-operation panel and top-side facility connection Three-pump solvent supply, three-pump NTD supply, two-pump NTR supply and (Qty 2) three-pump developer supplies Dual-feed AC power box with two separate breakers and top-side facility connection
    OEMモデルの説明
    It enables higher throughput, increases wafers per day, and improves overall equipment efficiency. Additionally, it also meets industry requirements for versatile lithography equipment capable of leading edge processes, including double patterning.
    ドキュメント

    ドキュメントなし

    verified-listing-icon

    検証済み

    カテゴリ
    Coaters & Developers

    最終検証: 昨日

    主なアイテムの詳細

    状態:

    Used


    稼働ステータス:

    不明


    製品ID:

    141942


    ウェーハサイズ:

    12"/300mm


    ヴィンテージ:

    2015


    Logistics Support
    Available
    Transaction Insured by Moov
    Available
    Refurbishment Services
    Available
    同様のリスト
    すべて表示
    TEL / TOKYO ELECTRON LITHIUS Pro V-i

    TEL / TOKYO ELECTRON

    LITHIUS Pro V-i

    Coaters & Developers
    ヴィンテージ: 2015状態: 中古
    最終確認昨日

    TEL / TOKYO ELECTRON

    LITHIUS Pro V-i

    verified-listing-icon
    検証済み
    カテゴリ
    Coaters & Developers
    最終検証: 昨日
    listing-photo-f4d74ee9653347cc8a6ec28596768cd6-https://api-v2.moov.co/listingPhotos/408459/image/md.jpeg
    主なアイテムの詳細

    状態:

    Used


    稼働ステータス:

    不明


    製品ID:

    141942


    ウェーハサイズ:

    12"/300mm


    ヴィンテージ:

    2015


    Logistics Support
    Available
    Transaction Insured by Moov
    Available
    Refurbishment Services
    Available
    説明
    Multi-block resist coater/developer
    構成
    Cassette block: (Qty 5) FOUP load ports Carrier RFID capability and pressure sensor on CSB Developer stacks 1, 2 and 4 (per stack): (Qty 2) developer cups sharing a common arm and (Qty 2) NTD cups with individual nozzle arms Temperature-controlled dispense: one MGP nozzle shared by the developer cups and one 2 mm NTD nozzle per NTD cup One ADR nozzle per stack and one N2-purged PDR nozzle per NTD cup One bevel rinse nozzle set per NTD cup and one backside rinse nozzle set per cup Bulk FSI developer supply, external thermal control in STHC and separate solvent-base drain Pre-plumbed for future FIRM field retrofit Coater stack 3 and top coater stack 5: Stack 3: (Qty 10) 1.2 mm resist nozzles, (Qty 10) 3 mL CRD dispense pumps and (Qty 10) single-bottle resist supplies Stack 5: (Qty 6) 1.2 mm resist nozzles, (Qty 6) 3 mL CRD dispense pumps and (Qty 6) single-bottle resist supplies Each stack: (Qty 4) coater cups with backside rinse, one temperature-controlled SRRC nozzle and (Qty 4) COT dispense detection systems Each stack: adjustable EBR angle, bulk FSI solvent dispense and version 2 bevel rinse nozzle Each stack: exhaust pressure control, exhaust duct and drain case cleaning, and external thermal control in STHC Thermal processing: (Qty 9) chilling adhesion stations (CADH) with plate-temperature-based wafer wedging detection Bubbler-type HMDS tank in the main process block Slim chill plate stations (SCPL) with vacuum-based wafer wedging detection Chill plate stations (CPL) with optical wafer wedging detection Chilling high-precision hot plate stations (CPRP) with plate-temperature-based wafer wedging detection and 0.1 mm ceramic proximity gap pins on the chilling arm Immersion and interface blocks: IPRB with IPRA wafer transfer arm (Qty 5) pre-immersion spin rinse stations (SRS), each with an IDR nozzle, N2 capability and an immersion edge nozzle (Qty 4) post-immersion rinse stations (PIR) with IDR nozzles and N2 IFBS with IRAI wafer transfer arm and pickup from both sides Environmental control: TEL system temperature and humidity controller (STHC) Shinwa unit controls system environment, chemical temperature and CPL temperature (Qty 2) return-air plenums Chemical supply and power: (Qty 2) chemical cabinets with HMDS canister, sub-operation panel and top-side facility connection Three-pump solvent supply, three-pump NTD supply, two-pump NTR supply and (Qty 2) three-pump developer supplies Dual-feed AC power box with two separate breakers and top-side facility connection
    OEMモデルの説明
    It enables higher throughput, increases wafers per day, and improves overall equipment efficiency. Additionally, it also meets industry requirements for versatile lithography equipment capable of leading edge processes, including double patterning.
    ドキュメント

    ドキュメントなし

    同様のリスト
    すべて表示
    TEL / TOKYO ELECTRON LITHIUS Pro V-i

    TEL / TOKYO ELECTRON

    LITHIUS Pro V-i

    Coaters & Developersヴィンテージ: 2015状態: 中古最終検証:昨日
    TEL / TOKYO ELECTRON LITHIUS Pro V-i

    TEL / TOKYO ELECTRON

    LITHIUS Pro V-i

    Coaters & Developersヴィンテージ: 2011状態: 中古最終検証:17日前
    TEL / TOKYO ELECTRON LITHIUS Pro V-i

    TEL / TOKYO ELECTRON

    LITHIUS Pro V-i

    Coaters & Developersヴィンテージ: 2015状態: 中古最終検証:60日以上前