
説明
Backside grinder Details Attached構成
(Qty 2) Load ports -3x Universal Chuck Table for 12” -Low vibration Air Bearing Spindle -Robotic Wafer Transportation System -Vacuum Pump System -GUI – Graphical Operation Panel and Video Display Unit -Electrical Unit & Main Body Lifting Jig Set -Signal Tower -Power: 200V 3 phase (without Transformer) -CE-mark and EMC conformity -English Operation/Trouble Shooting Manual -Standard Accessories - Duct Unit Assembly – filtration and air suction - Spindle Protection Device in case of air leakage switch to reserve air/N2 - Wafer Protection Device - hold Wafer during Vacuum leakage - UPS- Uninterruptable Power Supply (with English manual) - Disco Standard SECS / GEM Software lt. Protocol - T2 Pad Cleaning System (standard: universal, non ceramic !) - Software Modification Offset for Positioning Table - External water nozzle on Z1 + Z2 wheel with adjustable flow rate - Adjustable water flow on T2 Pad to avoid drying up of pad surface - Automatic Set-up of wheel and Chuck after wheel change - Ionizer on Spinner Station Water Temperature Unit DTU1531 Two separate temperature process cycles for Spindle cooling water and grinding water (without Transformer) Cooling Water System Spindle Motor (circulation type) -Temp. setting range of supplied water: 15 – 30°C -Temp. Accuracy Assurance Range: 20 to 25°C -Temp. fluctuation range of supplied water: +/- 0,5°C -Cooling capacity: 1.5 kW (at water temperature of 20°C) -Water pumping capacity: 15 L/min at 0.30/0.35 MPa Cutting Water System (waste type) -Temp. setting range of supplied water: 15 – 30°C -Temp. Accuracy Assurance Range: 20 to 25°C -Temp. fluctuation range of supplied water: +/- 0,5°C -Water pumping capacity 25 L/min at 0.27/0.29 MPa -Cooling capacity: 6.3 kW(possible to cool water of 25 L/min up to about 3.6°C) -Heating capacity 12.5 kW (possible to cool water of 25 L/min up to about 7.2°C) FOUP opener Unit Double Port with mapping system Applicable cassette: FOUP (SEMI compliant), FOSB (SEMI compliant), 300 mm/200 mm double slot cassette, 300 mm/200 mm DBG cassette, 200 mm open cassette (adapter required) Additional Cleaning and packing of machine and accessory in Cleanroom class 10.000OEMモデルの説明
提供なしドキュメント
DISCO
DTG8460
カテゴリ
Lapping, Polishing, Grinding
最終検証: 2日前
主なアイテムの詳細
状態:
Used
稼働ステータス:
不明
製品ID:
154852
ウェーハサイズ:
不明
ヴィンテージ:
2020
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available