説明
説明なし構成
構成なしOEMモデルの説明
The DFP8140 is a fully automatic polisher made by DISCO Corporation. It is a dry polisher for Φ8-inch wafers with chemical-free stress relief. This dry polisher can remove the grinding damage layer on the backsides of wafers up to Φ8 inches without slurry. This process greatly reduces wafer breakage and warpage and improves die strength and product yield. The DFP8140 is designed to polish wafers of diameter Φ4/5/6/8 inch (select one size) using an anomalous in-feed grinding with wafer rotation method. It uses a Φ300 mm dry polishing wheel and a porous chuck table with vacuum chuck-method. The chuck table has a revolution speed range of 0-300 min-1 and is cleaned using water & air thrust up, leveling stone and brush cleaning. The spindle has an output of 4.8 kW and a revolution speed range of 1,000-4,000 min-1. The machine dimensions are 1,200 × 2,670 × 1,800 mm (W×D×H) and it weighs approximately 1,900 kg.ドキュメント
ドキュメントなし
DISCO
DFP8140
検証済み
カテゴリ
Wafer Polishing
最終検証： 60日以上前
主なアイテムの詳細
状態：
Used
稼働ステータス:
不明
製品ID：
101711
ウェーハサイズ：
不明
ヴィンテージ：
不明
Have Additional Questions?
Logistics Support
Available
Money Back Guarantee
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
DISCO
DFP8140
カテゴリ
Wafer Polishing
最終検証： 60日以上前
主なアイテムの詳細
状態：
Used
稼働ステータス:
不明
製品ID：
101711
ウェーハサイズ：
不明
ヴィンテージ：
不明
Have Additional Questions?
Logistics Support
Available
Money Back Guarantee
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
説明
説明なし構成
構成なしOEMモデルの説明
The DFP8140 is a fully automatic polisher made by DISCO Corporation. It is a dry polisher for Φ8-inch wafers with chemical-free stress relief. This dry polisher can remove the grinding damage layer on the backsides of wafers up to Φ8 inches without slurry. This process greatly reduces wafer breakage and warpage and improves die strength and product yield. The DFP8140 is designed to polish wafers of diameter Φ4/5/6/8 inch (select one size) using an anomalous in-feed grinding with wafer rotation method. It uses a Φ300 mm dry polishing wheel and a porous chuck table with vacuum chuck-method. The chuck table has a revolution speed range of 0-300 min-1 and is cleaned using water & air thrust up, leveling stone and brush cleaning. The spindle has an output of 4.8 kW and a revolution speed range of 1,000-4,000 min-1. The machine dimensions are 1,200 × 2,670 × 1,800 mm (W×D×H) and it weighs approximately 1,900 kg.ドキュメント
ドキュメントなし